1-877-447-3540

  
  


TB 110 Truck Mounted Telescopic Belt Conveyor

Category: Telebelts

Operating at up to 5 cubic yards per minute, the Telebelt® TB 110 can quickly convey a wide variety of materials ranging from sand to 4-inch rock. The four-section telescopic conveyor provides 106 feet 1 inch of horizontal reach in heights as low as 15 feet 9 inches with smooth, surge-free conveying. Setup is quick and easy in congested areas, even in rough terrain, with its unique butterfly outriggers.

 

 

Height & Reach
Number of sections 4
Conveyor horizontal reach: maximum at 0° 106' 1" (32.34m)
Conveyor horizontal reach: maximum at 30° 91' 6" (27.91m)
Conveyor belt width 18" (457mm)
Feed convwyor length 38' 0" (11.60m)
Feed conveyor belt width 18" (457mm)
Trunk/end hose length 15' 0" (4.57m)
Discharge height from grade: maximum at 30° 60' 2" (18.36m)
Discharge height from grade: maximum at -15° -20' 0" (-6.11m)
Rated capacity at 0°: main and feed conveyors by minute 5.00 yd3/min (4.00 m3/min)
Rated capacity up to 20°: main and feed conveyors by minute 3.80 yd3/min (2.90 m3/min)
Outriggers
Net reach beyond outriggers: at 0° 100' 6" (30.65m)
Net reach beyond outriggers:  at 30° 86' 0" (26.23m)
Outriggers spread L-R - front hydraulically rotate out and down 23' 1" (7.05m)
Outriggers spread L-R - rear hydraulically rotate out and down 26' 9" (8.17m)
Outrigger load: Front 30,350 lbf (135 kN)
Outrigger load: Rear 34,395 lbf (153 kN)

 

Truck-Mounted Weights
Steering 19,008 lbs (8,621 kg)
Pusher 10,000 lbs (4,535 kg)
Tandem 33,754 lbs (15,309 kg)
Total 62,465 lbs (28,465 kg)

 

 

 

 

Ask about this product